20% OFF shipping at sudoshz.ir on orders over $79 + up to 10% OFF products
sudoshz.ir
home > Metal-Fab Air-Cooled Temp/Guard 12" Attic Insulation Shield > Metal-Fab Air-Cooled Temp/Guard 12" Attic Insulation Shield
download picture
Metal-Fab Air-Cooled Temp/Guard 12" Attic Insulation ShieldDouble wall factory built Chimney Systems for use with gas, liquid, and solid fuel fired residential type and building heating appliances in accordance with the Standards for Chimneys, Fireplaces, Vents and Solid Fuel Burning Appliances, NFPA 211, BOCA National Mechanical Code, Standard Mechanical Code and the Uniform Mechanical Code. Air cooled Temp Guard products are tested and listed to UL 103 for continuous operating temperatures up to 1000F and
Shopping security

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

Double-wall factory-built Chimney Systems for use with gas, liquid, and solid-fuel-fired residential type and building heating appliances in accordance with the Standards for Chimneys, Fireplaces, Vents and Solid-Fuel Burning Appliances, NFPA 211, BOCA National Mechanical Code, Standard Mechanical Code and the Uniform Mechanical Code.

Air-cooled Temp/Guard® products are tested and listed to UL 103 for continuous operating temperatures up to 1000°F and 1700°F intermittent.  Air-Cooled Temp/Guard features a rigid 430 stainless steel flue combined with a male-to-female slip connection secured with sheet metal screws.  Our one-piece flue and casing design reduces installation time and cost with no field assembly required.

What's Included

  • 12" Attic Insulation Shield

Features

  • Listed to UL (1000°F continuous, 1700°F intermittent temperatures).
  • 2" Clearance to Combustibles.
  • Double Wall Factory-Built Chimney for use with masonry fireplaces that burn wood, oil, coal, or gas.
  • Cost-effective alternative for pre-fabricated Masonry Chimneys.

Specifications

 Application
For use with masonry fireplace applications.
Listings/Standards
NFPA 211, UL 103
Material Galvanized Steel
Inner Diameter 15"
Height
18"
Width 23"
Color Silver

Technical Drawings & Dimensions

Warranty

The Metal-Fab Air-Cooled TEMP GUARD factory-built chimneys, when installed according to manufacturer's instructions, as prescribed by Underwriters Laboratories Standard 103, and when properly and regularly cleaned and maintained as set forth below, are warranted by Metal-Fab Inc. under normal residential use against defects in
material or workmanship of the product for parts only for as long as the original consumer owns the chimney system. During the first ten years of the warranty, Metal-Fab will provide replacement chimney lengths at no charge. During the balance of the warranty, Metal-Fab will provide replacement chimney lengths at 50% of the current retail price in effect at the time of the warranty claim. The defective part(s) must be returned with all transportation charges prepaid by the owner to the Customer Service Department, Metal-Fab Inc., 3025 May Avenue, Wichita, Kansas 67213. MetalFab Inc. will in turn ship the repaired or replacement part to the owner, freight collect, with the owner to be responsible for all freight charges. This warranty does not cover any labor or other service charges incurred by the owner, or any parts not manufactured by Metal-Fab Inc.

Click to see Full Warranty Details

It is the OWNER'S RESPONSIBILITY to establish:

  1. The date of the original installation of the product;
  2. The name of the original purchaser;
  3. The name of the installer;
  4. That the product was installed according to manufacturer's instructions; and
  5. That the product was properly cleaned and serviced once each year by a licensed chimney sweep.

DISCLAIMERS AND EXCLUSIONS

The following shall be applicable to those products of Metal-Fab Inc. described above:

  1. The warranty described hereinabove shall be IN LIEU of any other warranty, express or implied. Except as set out hereinabove, there are NO other warranties and any statutory or implied warranty of MERCHANTABILITY or fitness for a particular purpose is EXCLUDED from this transaction and shall not apply.
  2. The sole and exclusive remedy against Metal-Fab Inc. shall be for the repair or replacement of defective parts as provided hereinabove. NO OTHER REMEDY (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. The sole purpose of the stipulated exclusive remedy provided for herein shall be the repair and replacement of defective parts in the manner provided hereinabove. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as Metal-Fab Inc. is willing and able to repair or replace defective parts in the prescribed manner.
  3. The owner shall not be required to deliver a defective part to Metal-Fab Inc. if:
    1. The part was destroyed as a result of its defect or any defect in any part covered in this warranty; and
    2. Metal-Fab Inc. is reasonably satisfied that the part was defective at the time of sale.
    If both of these conditions are met to Metal-Fab Inc.'s satisfaction, it will replace the part in the same manner provided herein as if the purchaser had delivered it to Metal-Fab Inc.
  4. The owner acknowledges that no oral statements purporting to be warranties, representations, or guarantees of any kind about any product of Metal-Fab Inc. have been made to the owner by Metal-Fab Inc., by the original purchaser if different from the owner, or by its dealer which in any way expands, alters, or modifies the terms of the warranty set out herein. Any such statements do not constitute warranties, shall not be relied on by the owner, and are not part of the contract of sale. This writing constitutes a complete and exclusive statement of the terms of any warranty, express or implied, of Metal-Fab Inc.
  5. There is NO WARRANTY for any defective part of a Metal-Fab product which has been removed from its original installation site or which, in the judgment of Metal-Fab Inc., arises from misuse, mishandling, neglect, chimney fire, flood, lightning, corrosive atmosphere, improper installation of the product, improper servicing of the product, unauthorized modification of the product, improper fuel supply to the product, or the failure of the installer to properly install or service the product as is set out in the installation instructions.

 Documents & Files

Metal-Fab Air-Cooled Temp/Guard 12" Attic Insulation Shield

Item no : 78301934685
sold recently : Login >>
US$ 300.00
Pay in 4 interest-free payments of $75.00 Learn more
Min. order: 1piece

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jun 20 - Jun 25

Enjoy 20% off shipping

US$ 300.00

1-11

US$ 270.00

12-35

US$ 210.00

36-59

US$ 180.00

60+

US$40

Get now

Sign up to your membership to get coupons up to

15%

Get now

Opportunity to enjoy order discount up to 15% off

Please add the products
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

recommand products

Related Searches