Protect your Incinolet’s start button with this Rubber Boot for Start Switch. This OEM boot covers the push-button start switch, helps shield the button during everyday use, and is reinstalled whenever the top is removed for service. The manual notes the top is secured with four screws and this rubber boot over the start button; remove them to lift the top, then replace the boot during reassembly. Serial numbers are not required.   

Key Features

Protective rubber boot for the start button, helps maintain reliable push-button operation. 

Sold separately from the Start Switch, fits the push-button start switch assembly. 

Simple service step, remove top, replace boot over the start button, reinstall top hardware. 

Compatibility

Works with Incinolet units that use a push-button Start Switch, voltage and serial numbers are not applicable. 

What’s Included

1 × Boot, Rubber, for Start Switch. 

Installation & Care (Quick Tips)

Unplug the unit before any service.

Remove the four top screws and the existing rubber boot to lift the top; reinstall the boot over the start button when refitting the top. 

Wipe the boot with a mild cleaner as needed; avoid harsh solvents that could degrade rubber.

Specs

Part name, Boot, Rubber, for Start Switch. 

Part Number: BOO002

FAQs

Is this included with the Start Switch?

No, the Start Switch is sold separately; the rubber boot is a separate part. 

Do I need to remove the top to replace the boot?

Yes, the top is held by four screws and the rubber boot over the start button; remove them to lift the top, then replace the boot during reassembly. 

Does voltage or model year matter?

No, this is a mechanical protective boot for the push-button Start Switch, not tied to voltage or serial ranges.