■Specifications Only for LEXUS/TOYOTA genuine wheels ・10mm 114.3-5H φ60 _2 pieces ・Exclusive wheel bolts (including rings) _10 pieces ■ A 10mm spacer for genuine wheels developed exclusively for TOYOTA and LEXUS cars. Previously, when installing a 10mm spacer, it took time and effort to replace the hub bolt with a long type, but this was resolved by manufacturing a special nut. Now you can easily install a 10mm spacer. The shape of the special nut is also made to be the same as the genuine Toyota/Lexus nut, so it will not feel strange even if it is installed only on the front or rear side. The spacer body also eliminates wheel wobbling by cutting out the dedicated hub center with high precision. In addition, the surface is treated with white alumite, making it corrosion resistant and durable, so you can use it with confidence. Compatible models are Toyota and Lexus genuine wheels that use straight nuts. ■[Notes on installing compatible models] *For vehicles using genuine M12 size straight nuts. *Special product for genuine wheels (flat nut type). *Please use only with genuine wheels and the included special nuts and washers. *Cannot be installed on non-brand wheels. *Cannot be installed on steel wheels. *Product hub center height is set to 10mm. It cannot be installed if the depth inside the wheel is less than 10mm. *It may not be possible to install it on vehicles with a vehicle hub height of 8.5mm or more, or vehicles with grease caps, etc. *Please be sure to check the actual vehicle to confirm wheel compatibility.


Manufacturer: ‎KSP Engineering
Brand: ‎R.E.A.L
Product size: ‎19 x 26 x 9 cm; 2 kg
Manufacturer reference: ‎KS-521060
Exterior condition: ‎Steel, aluminum
Product dimensions: Depth x Width x Height: ‎19 x 26 x 9 cm
Product weight: ‎2 Kilograms