White 6000K

Product introduction: Using highly reliable LED chips made by American CREE, it emits high-intensity light stably for a long period of time. By adopting a light distribution shade that controls the bundle of light sources, the cut line will appear neatly when installed on the vehicle. Built-in aluminum heatsink cooling fan! The heat dissipation effect reduces the thermal deterioration of LED, making it car-friendly and long lasting. Easy to install with all-in-one kit. High/Low switching compatible type. Can also be installed on resin lens cars. Precautions for use Although this product has passed the vehicle inspection standards that meet the requirements for safety standards, it may be judged as non-conforming to the vehicle inspection if it is left to the discretion of the inspector at the vehicle inspection station. In addition, due to the reflector of the lamp, lens shape, deterioration, etc., the original effect of the bulb may not be demonstrated and the bulb may not pass vehicle inspection. In that case, please have your vehicle inspected after installing the genuine valve. Please do not look directly at this product for a long time when it is lit. Doing so may cause visual impairment. This product is an electronic device and it is extremely dangerous to disassemble or modify it before use. Also, please never install the product in a manner other than specified. This is extremely dangerous as it may cause a fire or ignition. If you notice any unusual smells or noises while driving, stop your vehicle in a safe place immediately and have it inspected. Do not place this product within the reach of infants and young children. Putting it in your mouth or touching it may cause injury. When this product is turned on, noise may be heard on the radio, etc., but this is not a malfunction. During rainy weather or when washing your car, the lens may become cloudy or condensate due to the temperature difference with the outside air. This product is for DC12V vehicles only. DC24V vehicles cannot be used. Also, it cannot be installed on foreign cars or motorcycles, even if they are DC12V cars. This product is only for H4 headlights. Please refrain from installing or wearing it in areas other than those specified. After installation, please perform regular inspections (checking the lighting, etc.). If you find any lighting defects (insufficient light intensity, LED burnout, etc.), please remove this product immediately. Please do not leave the lights on for long periods of time when the vehicle is stopped. The halogen bulb becomes extremely hot immediately after it is turned on. Make sure that the halogen bulb has cooled down sufficiently before starting work. Please use it so as not to violate automobile-related laws such as safety standards. There are restrictions on the use of light colors, etc. depending on the application. LEDs emit light differently than H.I.Ds and halogen bulbs, so even if they have the same Kelvin number, they may look different to the human eye. Be sure to start the engine before turning on this product. It may not light up unless the engine is started. For vehicles equipped with idling stop, the light may not turn on or may flicker for a moment when the engine starts. Do not install the controller of this product near the corner sensor. (Please keep a distance of at least 20 cm.) This may cause malfunction. Please make sure that this product is securely fixed before driving. Doing so may cause accidents such as falling off or damage. Never install or use the product with excessive force as this may cause injury or accidents.


Manufacturer: ‎Axs
Brand: ‎Axs
Model name: ‎GRX-50
Product size: ‎17.09 x 13.11 x 5.89 cm; 112 g
Product model number: ‎GRX-50
Discontinued by manufacturer: ‎No
Position: ‎Right
Valve shape: ‎H4
Product dimensions Depth × Width x height: 17.1 x 13.1 x 5.9 cm
Number of bolts: 12 bolts
Color: White
Product weight: 112 g