Hager VME911CUSPD Design Evo 11 Way High Integrity Consumer Unit with 100A Switch, Dual Type A RCCBs & Type 2 SPD

The Hager VME911CUSPD Design Evo Consumer Unit is a premium 11 way high integrity distribution board designed for modern domestic electrical installations. Featuring a 100A main switch, two 100A 30mA Type A RCCBs and a factory-fitted Type 2 Surge Protection Device (SPD), this consumer unit provides enhanced circuit protection, improved fault discrimination and reliable surge protection for residential properties.

Part of Hager’s advanced Design Evo range, the VME911CUSPD is specifically designed for installations located within living areas. Its high integrity configuration allows selected circuits to be protected individually by RCBOs, while remaining circuits are distributed across two RCCBs. This arrangement helps reduce nuisance tripping, minimise inconvenience during faults and improve overall installation reliability. :contentReference[oaicite:1]{index=1}

Key Features

• 11 way high integrity consumer unit with 100A main switch
• Dual 100A 30mA Type A RCCBs included
• Factory-fitted Type 2 Surge Protection Device (SPD)
• High integrity layout with dedicated RCBO positions
• Designed to reduce nuisance tripping on essential circuits
• Allows distribution of earth leakage currents across multiple RCCBs
• Suitable for installations protected by 60A, 80A or 100A cut-out fuses
• Type A RCCBs detect both AC and pulsating DC residual currents
• Cable clamp secures incoming supply cables and meter tails
• Round cable entry points positioned on the top, bottom and sides
• Rear knockouts supplied with cable protector plate
• Rigid top wall construction improves enclosure strength
• Full metal DIN rail for secure mounting of protective devices
• Quick-release RCBO clips allow removal without disturbing the busbar
• Optimised wiring space for efficient installation
• Top-mounted neutral and earth terminal rails simplify cable management
• Locate-and-hold cover assists during installation
• Retained cover screws prevent accidental loss
• Torque settings displayed inside the cover for easy reference

Technical Specifications

• Product Code: VME911CUSPD
• Range: Hager Design Evo
• Configuration: 11 Way High Integrity Consumer Unit
• Main Switch Rating: 100A
• RCCB Configuration: 2 x 100A 30mA Type A RCCBs
• Integrated Surge Protection: Type 2 SPD
• Rated Assembly Current (InA): 100A
• Rated Operational Voltage (Un/Ue): 230V AC, 50Hz
• Rated Insulation Voltage (Ui): 320V AC
• Rated Impulse Withstand Voltage (Uimp): 4kV
• Rated Frequency: 50Hz
• Outgoing Device Ratings: RCBOs 6A–50A
• Conditional Short Circuit Rating (Icc): 16kA RMS at 250V
• Ingress Protection: IP2XC
• Impact Resistance: IK05
• Pollution Degree: 2
• Earthing Systems: TN-C-S and TN-S
• Installation Type: Surface Mounted
• Standards: BS EN 61439-3
• EMC Classification: Environment B
• Incoming Line/Neutral Terminal Capacity: 50mm²
• Mechanical Impact Protection: IK05

High Integrity Circuit Arrangement

The high integrity design enables selected circuits to be protected independently using RCBOs, while other circuits are split across two RCCBs. This configuration helps minimise disruption during faults and reduces the likelihood of unwanted tripping caused by accumulated earth leakage currents.

Factory-Fitted Type 2 Surge Protection

The integrated Type 2 SPD provides protection against transient overvoltages caused by lightning strikes and switching events. This helps protect valuable electrical equipment including televisions, computers, smart home devices, communication systems and household appliances.

Designed for BS 7671 Compliance

The VME911CUSPD is designed to support compliance with BS 7671:2022 requirements relating to circuit segregation, additional RCD protection, concealed cable protection and surge protection. The non-combustible metal enclosure also complies with BS EN 61439-3 requirements for domestic consumer units.

Available Accessories

• VM02CE Cable Protector Plate – Protects cables entering through the rear of the enclosure
• VM01SP Rear Stand-Off Plates – Allow rear cable entry for surface-mounted cable installations

Ideal Applications

• Residential consumer unit upgrades
• New-build homes
• Property refurbishments and rewires
• Smart homes and connected properties
• Installations requiring circuit segregation
• Homes requiring integrated surge protection
• Domestic electrical systems with essential circuits

Enhanced Safety and Circuit Protection

The Hager VME911CUSPD Design Evo Consumer Unit combines high integrity circuit configuration, dual Type A RCCBs and integrated surge protection within a robust metal enclosure. Designed to meet the demands of modern residential electrical installations, it provides outstanding protection, reliability and compliance.

Data Sheet:
Download the Hager VME911CUSPD Data Sheet

Instruction Manual:
Download the Hager Design Evo Installation Instructions