Replace diaphragm kit for the 14XT driver.

The 14XT is a high frequency compression driver designed to operate between the frequencies of 1,000 Hz to 10Hz and can handle 100 watts of peak power. The 14XT is designed with a solid, one-piece titanium diaphragm, a 1.4 inch voice coil and a high temperature kapton coil former.

All the information you may need is below:

Product Type: Diaphragm Kits

Peavey Part Number: 442500

Product It Fits:

Sensitivity: 94 dB 1W 1m

Voice Coil Cooling: na

Net Weight: 1.9 lbs

Throat Parameter: Standard: 2" / 50.8 mm; Optional: 1.6" / 40.6mm; Supplied with throat extension

Nominal Impedance: 8 Ohm

Minimal Impedance: 7.1 Ohms

DC Resistance: 6.8 Ohms

Power Capacity 1Khz - 20Khz: 500 Hz to 20000 Hz

Nominal Efficiency: 30%

Frequency Response: 4 kHz to 27 kHz

Recommeded Crossover: 1000 Hz

Lowest Recommended Crossover: 500 Hz at 12 dB / Octave

Dimensions: 3.34 H x 3.34 W x 2.69 D

Horn Coupling Diameter: na

Horn Coupling Threads: na

Shipping Weight: Standard: 25 lbs / 11.4 kg

Diaphragm Kit: 377380

Power - Peak: 800W

Power - Program: 400W

Power - Continuous: 200W

Frequency Range: 75 Hz - 6 kHz

Voice Coil Diameter: 2" / 50.8mm

Voice Coil Material: 2 layers, thermally bonded copper wire; Kapton former Nomex stiffener

Znom (ohms): na

Revc (ohms): 6.000

BL (T/M): 13.442

Vas (Litres): 11.342

Cms (uM/N): 174.702

Mms (gm): 22.161

Qms: 5.274

Qes: 0.374

Qts: 0.349

Xmax (mm): na

Le (mH): na

SPL (1W 1m): 94.000

No (%): na

Vd (cu. in. /ml): na

Pmax (Watts pgm): na

Disp (cu. In. / ml): na

Replacement Basket: na

Output Sound Pressure Level: 107 dB

D.C.R.: 6.8 Ohms

Voice Diameter: 1"

Finish : ABS (Black)

Max Power Handling Capacity: 75W (EIA rs426) (8 Ohm system reference

Max Voltage: 15 v rms continuous; 35 v rms intermittent

Typical Impedance : Appears as a .13 uf capacitor