Built for sparkies and HVAC techs who cop real-site conditions, the Uni-T UT136C+ gives you accurate readings, fast sampling, and a big, easy-to-see display. It’s a bloody good everyday meter that handles drops, long days, and Aussie heat—no worries.

Key Features & Trade Benefits

• CAT II 1000V / CAT III 600V safety — work with confidence on appliances and distribution panels when used correctly.
• 2 m drop tested + 3 mm protective sleeve — keeps working after the inevitable knock off the ladder.
• Fast sampling (≈4×/sec) — stabilises quickly so you can log readings and move on.
• 4000-count LCD with backlight & overload alarm — clear numbers in dim plantrooms; alerts help prevent mistakes.
• Capacitance to 40 mF + quick test (≈1 mF in ~4 s)
• Frequency to 40 MHz — handy for drive outputs and signal checks.
• Temperature –40 °C to 1000 °C with included probe — spot-check discharge air or motor casings on the fly.
• Low power draw & auto power-off — over 500 hours battery life, so it’s ready when you are.

Why This Product Matters

Real job: you’re rooftop in Brisbane in 36 °C, compressor keeps tripping. With the UT136C+ you verify supply, check capacitor value in seconds, confirm the fan motor’s not shorting, and you’re back down before your water’s warm—she’ll be right. If you’re building out your test kit, browse our multimeters category for more options.

Pro Tip

For capacitance checks on start/run caps, discharge the cap safely first, then clip on and hold steady until the readout settles. Log readings on installs to cut “mystery” call-backs later.

Compatibility & System Info

• Measurements: AC/DC V up to 1000 V; AC/DC A up to 10 A; Ω to 40 MΩ; capacitance to 40 mF; frequency 400 Hz–40 MHz; temperature –40 °C to 1000 °C.
• Functions: diode test, continuity buzzer, hFE transistor test, data hold, backlight, auto power-off, low-battery indicator.
• Safety: CAT II 1000 V / CAT III 600 V; follow AU electrical safety practice and isolate wherever possible.

Local SEO Note

From coastal Perth plantrooms to dusty Western Sydney warehouses, the tough sleeve and 2 m drop rating mean this DMM is a fair dinkum daily driver.

What’s Included

• 1 × Uni-T UT136C+ Digital Multimeter
• Test leads + temperature probe
• Batteries pre-fit (2 × 1.5 V R6)
• English user manual
• 12-month warranty

Specifications (Quick Reference)

Warranty & Returns

Covered by a 12-month manufacturer/supplier warranty against defects. For shipping, returns and RTB process, see Shipping & Returns. Keep proof of purchase and test notes.

FAQs

Related Products

• Need faster cap checks? The SUPCO MFD10 is a quick one-hand capacitance tester that pairs perfectly with your DMM.
• Doing motor or cable insulation tests? Add the UT501A megohmmeter for proper IR verification.
• Measuring current without breaking the circuit? A clamp meter collection makes live current checks safer and faster.
• Spare leads ready to go? Keep a full lead kit in the van so a broken probe won’t stop your day.