OpenFAN

An Open-source, open-hardware 12V PWM fan controller for the hobbyists and hackers!

This fan controller allows you to control 10 PWM fans over USB or remotely over network.

OpenFAN gives you two ways to control each fan:

• Traditional (PWM): Set target PWM and the fan will spin at whatever RPM it is designed to spin with that PWM. (ie. Assuming 2000RPM fan, if we set the PWM to 50%, the fan should spin at 1000RPM which is half of full speed)
  
  
• Advanced (RPM): Set target RPM and OpenFAN will use it's built in PID algorithm to keep the fan always spinning at that RPM.

OpenFAN also has an open-source API that allows you to programmatically control your fans, set custom profiles and more.

OpenFAN was designed by PC enthusiast for PC enthusiasts.

Key features:

• Works on Windows, Linux and Mac
• 10x PWM fans (Supports 12V, 4-pin fans)
• Individually control each fan
• SATA power (cable not provided)
• USB-C communication (motherboard cable included)
• Control fans by setting target PWM or target RPM
  
• Optional I2C/1-Wire (header not populated)
• Open source API for communication and control
• Open source and open-hardware design
• Control fans over USB or remotely over network*
• FanControl integration through plugin

 * To control fans remotely over network, the OpenFAN board needs to be connected to the PC via USB and running the OpenFAN software. The software allows you to access the fan controller remotely over network.

Additional information

Board dimensions: 72mm x 55mm x 15mm
RoHOS, Lead free
Documentation: https://docs.sasakaranovic.com/

What's included in the package?

• 1x OpenFAN PCBA
• 1x USB Type-C to Motherboard USB header cable

We recommend that you put OpenFAN into an enclosure to avoid damage or short-circuit.

Please note that OpenFAN ships without an enclosure.
You can 3D print one from the OpenFan repository, STL and source files available here.
Or if you want to design your own, a STEP file of the PCBA is also available here.

Project information

Below is the video of how OpenFAN was designed and developed.

Designed by Sasa Karanovic of Karanovic Research and released as open-source and open-hardware. All source files can be found in the official OpenFAN repository.