2-component, 100% solids, self-leveling and high-build epoxy floor coating. It is designed to be used as a protective floor coating on concrete, over an existing epoxy coating or to create metallic/decorative flooring systems.

Technical Data Sheet

EP-1000 is a 2-component, 100% solids, high-build, self-leveling epoxy coating primarily used for industrial, commercial, and residential concrete floor protection. It can serve as both a protective coating and a binder component in resurfacing or patching projects exposed to aggressive environments. It is also suitable for creating decorative and metallic flooring finishes.

• Component A: Epoxy resin
• Component B: Hardener
• Optional: Metallic pigments (4–8 oz per 3-gal kit) for decorative finishes
• Crack Filler: Epoxy crack filler (to be used before coating)
• Primers: Not explicitly mentioned, but proper surface preparation is critical
• Top Coats: EP-1000 itself may be applied as both base and finish coat; alternative topcoats can be used for texture or gloss variation

• Industrial: Garages, warehouses, airports, hangars, manufacturing plants
• Commercial: Shopping malls, boutiques, offices, hospitals, restaurants, schools
• Residential: Hallways, basements, kitchens, bathrooms, pool outlines, entertainment rooms

• Surface Prep: Mechanical preparation to ICRI-CSP2 profile via diamond grinding; all contaminants removed; all cracks/holes repaired with epoxy filler
• Mixing Ratio: 2 parts A : 1 part B (by volume or 100g resin : 42g hardener by weight)
• Mixing Time: 2–3 minutes per component, followed by combined mixing
• Metallic Version: Pigment added and allowed to sit 30 minutes before B is added
• Application Method: Rubber squeegee + 10mm roller for 1st and 2nd coats
• Cleaning: Xylene (before curing)
• Coverage Rates:
• 1st Clear Coat: 200–300 ft²/gal @ 5–8 mils
• 2nd Clear Coat: 133–200 ft²/gal @ 8–12 mils
• Metallic Coat: 50 ft²/gal @ 32 mils

• Pot Life: 50 minutes at room temperature (142g mix)
• Drying Times (21°C / 70°F @ 50% RH):
• Re-coat/topcoat: 8–12 hours
• Light foot traffic: 12–24 hours
• Full cure (heavy traffic): 7 days
• Application Temperature: 15°C–21°C (60°F–70°F); surface must be 3°C above dew point
• Humidity Limit: Max 85% RH; substrate moisture < 4%
• UV Resistance: Not UV stable – discoloration may occur under UV exposure
• Environmental Warnings: Avoid application if humidity can pass through porous surfaces; hydrostatic pressure may cause delamination if no moisture barrier is present
• Viscosity: Mixed: 500–600 cps
• Strengths:
• Flexural: 5,500 psi
• Compressive: 10,500 psi
• Tensile: 6,500 psi
• Adhesion: >300 psi (concrete failure)
• Hardness: Shore D 78–80
• Shelf Life: 1 year in unopened containers