ALSAN FLOOR QUARTZ are coloured aggregates used as a decorative medium for ALSAN liquid-applied membrane applications.

UNITS PER SKID: 49

ALSAN FLOOR QUARTZ is a decorative coloured aggregate designed for use in liquid-applied membrane systems. It is primarily used to enhance the aesthetic appearance and surface texture of resin-based flooring systems, particularly within the ALSAN FLOOR product line by SOPREMA. The aggregates are broadcast into a wet resin layer to create a durable, slip-resistant, and visually appealing surface.

ALSAN FLOOR QUARTZ is not a standalone system but is used in conjunction with ALSAN liquid-applied resins. The typical system includes:

- Base Coat: ALSAN resin (specific type depends on the system design, such as ALSAN RS or ALSAN FLOOR resins).

- Decorative Aggregate Layer: ALSAN FLOOR QUARTZ broadcast into the wet base coat.

- Top Coat: A clear ALSAN top coat resin is applied over the cured aggregate layer to seal and protect the surface.

This material is suitable for use in commercial, industrial, and institutional flooring systems where both aesthetics and performance are required. Common applications include:

- Decorative interior floors

- Commercial lobbies and corridors

- Retail spaces

- Institutional and healthcare environments

- Light industrial areas

- Broadcast Method: ALSAN FLOOR QUARTZ is broadcast either randomly or at full saturation into the wet ALSAN resin layer.

- Curing and Finishing: Once the resin cures, excess aggregate is removed using a broom, vacuum, or sandblaster. A clear ALSAN top coat is then applied to lock in the aggregates and provide a smooth, durable finish.

- Coverage: One 50 lb (22.68 kg) box covers approximately 25 to 50 ft² (2.3 to 4.6 m²), depending on the desired texture and broadcast density.

- Aggregate Size: 40 mesh

- ALSAN FLOOR QUARTZ is available in a wide range of standard colours, with additional custom colours available upon request (subject to additional cost and lead time).

- This product is part of a system and must be used with compatible ALSAN resins and top coats for optimal performance.

- The final surface texture and appearance depend on the broadcast technique and the amount of aggregate used.

- Ensure that the base resin is still wet at the time of broadcasting to ensure proper adhesion of the aggregates.

- This product does not have specific environmental or curing limitations on its own, but the performance and application conditions are governed by the ALSAN resin products used in the system.

Please consult the relevant ALSAN resin and top coat technical data sheets for detailed information on pot life, curing times, temperature and humidity limitations, UV stability, and recommended application thicknesses.

https://www.soprema.ca/en/products-systems/alsan-floor-quartz