Description
Get ready to power wash everything with ease with this high-pressure cleaner. Featuring a robust 1400W carbon brush motor, it delivers powerful water pressure that easily tackles stubborn dirt. You can attach the detergent bottle to ensure further thorough cleaning without requiring an extra pump. It is also equipped with a range of cleaning accessories including a 5m high-pressure hose and handles, allowing you to choose from different spray modes and customize the water impact. With this high-pressure cleaner, your surroundings will look as good as new in no time.

Features
*Ideal for various cleaning tasks like car washes, patio cleaning, and furniture maintenance
*Flexible to clean around your garden, backyard and patio with a 5m-long hose
*Built-in handle makes the cleaner easy to move

Specifications
Overall Dimensions: 20cm W x 19cm D x 61cm H
Type: Pressure Washer
Power Source: Electricity
Colour: White and Black
Working Pressure: 7MPa(70 bar)
Allowable Pressure: 10.5MPa(105 bar)
Working Flow Rate: 5.5 l/min
Max. Flow Rate: 7.1 l/min
Max. Pressure Water Supply: 0.4MPa(4 bar)
Motor Capacity: 1400W
Power Supply Voltage: 240V~50Hz
Max. Water Temperature: 50??
Power Source: Plug-in
Wheels Included: No
Assembly Required: Yes

Package Content
1x High Pressure Washer
1 x Hose
1 x Cable
1 x Detergent Bottle
1 x Gun Lance
1 x Gun Handle
1 x Tap Connector
1 x User Manual

Operation Guide
Attach the high-pressure hose to the pressure water outlet of the machine.
Attach the spray handle to the high-pressure hose.
Mount the nozzle or any other equipment you want to use.
Connect the machine to the water and power supplies.
Rotate the nozzle to select a spray pattern from approximately0?? to 60??.
Turn the machine on and squeeze the trigger for activation.
Follow the sequence of rinse with water - spray detergent- rinse with water and clean from the bottom to the top.
Turn off the motor and water supply, squeeze the trigger to reduce the pressure.

Safety Guidelines
Read all instructions before using the
Ensure safety devices are operating properly before using the machine.
ALWAYS disconnect power before disassembling or repairing the unit of the
Keep the operation area clear of all persons. Close supervision is necessary when children are around.
Do not operate the machine when fatigued or under the influence of alcohol or
Do not overreach or stand on unstable Stand firmly and keep balance at all times.
Only place the machine on a stable surface during use, transportation, assembly, and dismantling.
The machine is not intended to be connected to the potable water mains. If necessary, please use only the inlet hose-set approved by IEC 61770.
Always wear goggles and protective clothing when operating maintenance.
Never spray flammable liquids or use a pressure washer in areas containing combustible dust, liquids or vapors.
Never operate the machine in a closed building or in or near an explosive environment.
Never put hands or fingers over the spray tip while operating the machine.
Always remove lance from gun before cleaning debris from the tip.
NEVER direct high pressure spray at any person, animal or self.
Never try to stop or deflect leaks with any body part.
Always keep the trigger safety lock in the locked position even when spraying is stopped for a moment.
The electrical supply connection shall be made by a qualified person and comply with IEC 60364.
The motor of this pressure washer will NOT run unless the trigger is
This machine is to be used only by trained operators.