Product description

• Highest possible energy class CELMA EEI = A2 BAT
• Nominal life-time up to 100,000 h (at ta 50 °C with a failure rate ≤ 0.1 % per 1,000 h) _ Large temperature range (for values see table)
•  Intelligent Voltage Guard (overvoltage indication and undervoltage shutdown)
• Precise lamp operation using adjustment of lamp parameters
• Advanced SMART-Heating for min. 50,000 starts without replacement of lamps _ Constant luminous flux irrespective of fluctuations in mains voltage
• Designed for THD < 10 %
• For luminaires of protection class I and protection class II
• Automatic start after replacement of defective lamps
•  Safety shutdown of defective lamps and at end of lamp life (EOL 2)
•  Insulation Displacement Connection (IDC) terminal for rapid automatic or manual wiring
• For emergency lighting systems as per EN 50172

Technical data
Mains voltage range 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V (lamp start ≥ 198 V DC)
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
Defined warm start ≤ 1.5 s
Operating frequency ≥ 39.5 kHz
Type of protection IP20

Lamp Wattage 2x36W

Lamp Type T26(T8)

Type  PC 2x18 T8 PRO sl

Dimensions L x W x H  280 x 30 x 28 mm

Hole spacing D  270 mm

Lamp power 64.0 W

Circuit power 70.7 W

EEI A2 BAT

Current at 50 Hz (220 V / 240 V) : 0.320 A  / 0.293 A

λ at 50 Hz 220 V / 240 V : 0.99 / 0.98

tc point max. :  75 °C

Ambient temperature ta : -25 ... +60 °C

tc/ta for ≥ 50, 000 h : 75/60 °C