Key Performance Features

• Integrated AIS Receiver: Displays AIS targets (Name, MMSI, BRG, DST, SOG, COG) directly on the screen with programmable CPA (Closest Point of Approach) collision alarms.

• Continuous Duty AIS: Unlike combined units that share an antenna, the GX6000 features separate VHF and AIS antenna connectors, ensuring AIS data is never interrupted during VHF transmission.

• NMEA 2000 & 0183 Connectivity: Fully supports all PGNs for Navigation, GPS, AIS, and DSC. It plugs directly into your NMEA 2000 backbone to share target data with your chartplotter.

• Integrated Voice Recorder: Automatically records up to two minutes of received audio, so you can replay a missed transmission or coordinate instructions.

• 25W Loud Hailer / Fog Horn: Includes a powerful 25W PA system with pre-programmed fog signals (Bells, Whistles, Horns) and "Listen Back" capability.

• Multi-Station Expandability: Supports up to two wired RAM4 (SSM-70H) microphones or up to four wireless RAM4W microphones (requires optional SCU-30 wireless access point).

Technical Specifications

In The Box

• 1 x GX6000 Quantum Radio Unit

• 1 x Speaker Microphone (With dedicated controls)

• 1 x DC Power Cord

• 1 x Gimbal Mounting Bracket and Hardware

• 1 x USB Cable (For firmware/PC updates)

• 1 x Owner's Manual

• 1 x DSC Warning Sticker

⚠️ Critical Note on Antennas & GPS

• Dual Antennas Required: For full functionality, the GX6000 requires two antennas: one standard VHF antenna and one dedicated AIS antenna (or a high-quality AIS splitter).

• External GPS: The GX6000 does not have an internal GPS antenna. It must receive GPS data from your NMEA 2000 network or the optional SCU-31 external GPS antenna to enable DSC distress features

Are you setting this up with a second station?

If you want to control this radio from the flybridge or cockpit, you'll need the RAM4 Wired Mic or the RAM4W Wireless setup. I can help you list the specific parts (like the SCU-30 hub) required for a wireless installation.